Headlight Glass For Toyota Camry 2007 2008 2009 Headlamp Shell Replacement Clear Lampshade Plastic Cover Car Accessories

Note: Each country’s vehicle model and name are different. Please take the photo as the standard. Do not understand. Please contact us.

Introduction:

Product Name: Headlight shell

Production process: PC hardening high temperature injection molding

Product material: PC material

Applicable models:For Toyota Camry 2007 2008 2009

Need other models, please leave a message.

High-end craftsmanship. Ensure quality.

installation:

1. If you have a better oven,Simply remove the back cover of the fixture and bulb.Heat in the oven to 80 Celsius. Heat and soften for 10 minutes and glue.The lamp is separated from the lamp cover.

2: If you don’t have an oven, you must use a heat gun, which heats the sharpest corner of the headlights for a while, and

Insert the screwdriver after the glue has softened. (Note: Don’t use too many forums to avoid damage; when preparing for gloves

Touch, still have a little heat, stop heating. Make sure the temperature is not too high to avoid damage

Faris

4: After heating for a long time, quickly open the corner, don’t forget to wear gloves (gloves should be clean, can not be discarded)

5: All goes well, the efficiency is higher, and one room is heated, one minute is enough. If it doesn’t go well. Continue one

Heat a separate part with a heat gun. The glue is soft. Quickly separate.

6: After separation, try your best. Clean the glue in the glue tank. Put on gloves and start installing new bulbs

7: Apply glue to the fuel tank with glue. Glue should be moderately serviced. About 2/3

8: Install a new lamp cover. A small amount of glue will overflow during installation. It can’t be processed first. After glue

drought. Handle the blade. The pinna glue and the friction surface are made of cloth.

At the end of the assembly, we need to air dry for 3-5 days and we need a few days. Reload the car. And can’t wash or rain in a week.